3.6.2 Lab - Implement VLANs and Trunking
Halaww manteman perkenalkan nama saya Bunga Clara dari kelas XI TJKT, disini saya mau berbagi cara mengconfig 3.6.2 Lab - Implement VLANs and Trunking
-------------------------------------------------------------------------------------------
1. Sambungkan Pc-A ke S1 seperti di topology atas menggunakan cable Copper Straight-through
Sambungkan S1 ke S2 seperti di topology atas menggunakan cable Copper Straight-through
Sambungkan S2 ke PC-B seperti di topology atas menggunakan cable Copper Straight-through
Sambungkan S1 Console dengan PC-A menggunakan cable Console
Sambungkan S2 Console dengan PC-B menggunakan cable Console
2. Klik PC-A >Desktop >Ip configure >tambahkan ip add 192.168.20.13
3. Klik PC-B >Desktop >Ip configure >tambahkan ip add 192.168.30.13
4. Klik PC-A >Desktop >Terminal > ketikan perintah berikut:
switch(config)# hostname S1
S1(config)# no ip domain-lookup
S1(config)# enable secret class
S1(config)# line console 0
S1(config-line)# password cisco
S1(config-line)# login
S1(config)# line vty 0 15
S1(config-line)# password cisco
S1(config-line)# login
S1(config)# service password-encryption
S1(config)# banner motd $ Authorized Users Only! $
S1# copy running-config startup-config
S1(config)# vlan 10
S1(config-vlan)# name Management
S1(config-vlan)# vlan 20
S1(config-vlan)# name Sales
S1(config-vlan)# vlan 30
S1(config-vlan)# name Operations
S1(config-vlan)# vlan 999
S1(config-vlan)# name ParkingLot
S1(config-vlan)# vlan 1000
S1(config-vlan)# name Native
S1(config)# interface vlan 10
S1(config-if)# ip address 192.168.10.11 255.255.255.0
S1(config–if)# interface vlan 20
S1(config-if)# ip address 192.168.20.11 255.255.255.0
S1(config–if)# interface vlan 30
S1(config-if)# ip address 192.168.30.11 255.255.255.0
S1(config)# interface range f0/2 – 5, f0/7 – 24, g0/1 – 2
S1(config-if-range)# switchport mode access
S1(config-if-range)# switchport access vlan 999
S1(config-if-range)# shutdown
S1(config)# interface f0/6
S1(config-if)# switchport mode access
S1(config-if)# switchport access vlan 20
S1(config)# interface f0/1
S1(config-if)# switchport mode trunk
S1(config-if)# switchport trunk native vlan 1000
S1(config-if)# switchport trunk allowed vlan 10,20,30,1000
5. Klik PC-B >Desktop >Teriminal >ketikan perintah berikut:
switch(config)# hostname S2
S2(config)# no ip domain-lookup
S1(config)# enable secret class
S2(config)# enable secret class
S2(config)# line console 0
S2(config-line)# password cisco
S2(config-line)# login
S2(config)# line vty 0 15
S2(config-line)# password cisco
S2(config-line)# login
S2(config)# service password-encryption
S2(config)# banner motd $ Authorized Users Only! $
S2# copy running-config startup-config
S2(config)# vlan 10
S2(config-vlan)# name Management
S2(config-vlan)# vlan 20
S2(config-vlan)# name Sales
S2(config-vlan)# vlan 30
S2(config-vlan)# name Operations
S2(config-vlan)# vlan 999
S2(config-vlan)# name ParkingLot
S2(config-vlan)# vlan 1000
S2(config-vlan)# name Native
S2(config-if)# ip address 192.168.10.12 255.255.255.0
S2(config)# interface range f0/2 – 17, f0/19 – 24, g0/1 – 2
S2(config-if-range)# switchport mode access
S2(config-if-range)# switchport access vlan 999
S2(config-if-range)# shutdown
S2(config)# interface f0/18
S2(config-if)# switchport mode access
S2(config-if)# switchport access vlan 30
S2(config)# interface f0/1
S2(config-if)# switchport mode trunk
S2(config-if)# switchport trunk native vlan 1000
S2(config-if)# switchport trunk allowed vlan 10,20,30,1000
Komentar
Posting Komentar